|
|
|
![]() | The Infinity BassLink SeriesThe BassLink line includes everything you need for great bass in your car, with no hassle. A subwoofer system is more than just a great speaker. Great bass requires an amplifier, an enclosure and a speaker to work together as a system. Because all the components in a BassLink system were designed to go together, each component was optimized for its particular job. The result is great bass in a cool-looking, space-saving package. |
Add bass where space is tight. |
Square One
Both the BassLink II's 10-inch subwoofer and 10-inch passive radiator are square. Infinity's goal was to maximize cone area and extract every last ounce of bass output out of this modestly sized housing.
Mounting Versatility
BassLink II can be mounted vertically or horizontally thanks to its unique mounting system. It provides user-adjustable input sensitivity, crossover frequency and bass-boost, allowing its performance to be optimized for any installation.
Class D Power
BassLink II features a 250W Class D subwoofer amplifier, providing all of the horsepower needed to drive the 10" subwoofer to fill the largest of SUVs.
Onboard Variable Crossovers
Includes an on-board electronic crossover, variable from 32Hz to 320Hz, to dial in just the right amount of mid frequencies for your system.
Included Remote Level Control
The amount of bass in popular recordings differs greatly from track to track. This remote level control varies the output of the amplifier from no output up to the maximum output level that you set with the input sensitivity control.
| Amplifier Power: | 250W RMS | |
| Frequency Response: | 20Hz to 120Hz | |
| Fuse: | 25A | |
| Max. Current Draw: | 26A | |
| Idle Current Draw: | Less than 800mA | |
| Input Sensitivity: | 50mV to 4V Line-level input; 1V to 16V universal interface | |
| Crossover Frequency: | 50Hz to 120Hz | |
| Crossover Slope: | 12dB per octave | |
| Bass Boost: | -6dB to +3dB @ 40Hz | |
| Dimensions (L x W x H): | 15-1/16 x 8-3/4 x 15-5/16 inches (383mm x 223mm x 389mm) | |
| Sub Level Control (with housing): | 2-3/16 x 2-5/16 x 7/8 inches (56 x 59 x 23 mm) | |
| Sub Level Control (without housing): | 2-3/16 x 1-5/16 x 3/4 inches (56 x 34 x 20 mm) |
| Expansion slot for BassLink 4sc amplifier module |
| DISCLAIMER: This is an Amazon storefront - the products referenced on this site are manufactured and sold by parties other than StereoCar.co.uk and its affiliates. Any questions, complaints, or claims regarding the products must be directed to the appropriate manufacturer, vendor or to Amazon.com. |